| Laminate
without solvents,toxins or water with superior bonding
power. |
| Heat,
pressure and HMT's exclusive Fusible Web giver users optimum
advantages. |
-
Reduce labor
- Less
Equipment
- Allows
for immediate fabrication
|
- Laminate
unlimited lengths and 2" to 62" widths
- Less
clean-up.
|
 |
The
low cost Advantage can adhere many
different substrates with numerous laminates in minutes,
allowing immediate fabrication. With the roll feed option,
the system is not limited to sheet stock. Roll goods,
such as fabric, wood veneers, melamine, various foils,
cork and a host of other materials can be mated using
the Advantage. |
- Low
Cost
- Ready
to Run in About 5 Minutes
- No
Clean Up Required
- Uses
Proven Hot Melt Technology
- Runs
on Single Phase Electricity
- No
Factory Installation Required
- Great
for Small to Mid-Range Shop
|
- Adhesive
is Non-Toxic and Environmentally Friendly
- Finished
Product can be Fabricated Immediately
- No
Messy White Glue or Contact Cement
- Free
Technical Support: 800/433-0730
- Installation
Video Included
- Free
DVD Upon Request
|
| |
|
Advantage Laminating Machine: $6,995.00
Adhesive Cost:
0.12¢ per square foot
Standard Roll Size: 200' length, width from 4" to
49.5" (A more economical 500' length roll available)
Rolls can be cut to customer specification (4" x
49.5" width) |
Larger,
more automated models available...
|
Model
|
S
& LS26M |
S
& LS50M |
S
& LS62M |
|
SIZE
|
48x60x21.5' |
77x60x21.5' |
79x60x21.5' |
|
WEIGHT
|
1265 LBS |
2515 LBS |
2740 LBS |
|
VOLTAGE
|
240/480 |
240/480 |
240/480 |
|
F.L.
AMPS |
35/20 |
75/40 |
85/45 |
|
AIR
USAGE |
1CFM@80PSI
(LS only) |
1CFM@80PSI
(LS only) |
1CFM@80PSI
(LS only) |
| To
view an online video demonstration of our laminators,
click on the appropriate link below: |
| HMT
Manufacturing Advantage Laminator |
|
| HMT
Manufacturing Laminator |
|
|
You
must have Flash Player
to view these movies
To download a free copy click -> |
|
Operating
an HMT Laminator
The following is a brief overview of operational steps of
our Laminator System. Please see our
operation manual for additional detail.
-
As the substrate enters the in-feed area, glue web is applied
from the glue web payout. A hot cut-off bar is then used
to separate the glue from the roll.
-
The laminate sheet is selected from the rack and positioned
to an indexing pin.
-
The substrate with the glue web is conveyed into the activation
area. Infrared heatbanks flash activate the glue web while
in motion. A finger switch is tripped by the advancing substrate
initiating the laminate drive (LS series only). The laminate
automatically meets with the advancing substrate with activated
glue web. Both enter the powered pinch roller then exit
to the out-feed conveyor.
-
The panel is now ready for immediate fabrication.
To
view a copy of our Laminator Manual,
click here.
To learn more
about our Optional Equipment, RollFeed, 480 Volt Transformer,
50"& 62" Conveyor, click
here.
|
